Molded Hook Tape
No loose filaments, no thickness to spare — molded hooks for tight assemblies.
Molded Hook Tape — 16 mm Red & Black, Mushroom Head
Molded mushroom hook for thin-wall panels and low-profile closures.
Molded Hook Tape — 20 mm Assorted Colours, Mushroom Head
Standard molded hook, high cycle life with a matching loop.
Molded Hook Tape — 25 mm Black & Grey, Mushroom Head
Everyday width for automotive trim, seating and access panels.
Molded Hook Tape — 30 mm Black & White, Mushroom Head
Wider head pattern for higher shear load on rigid panels.
Molded Hook Tape — 50 mm Clear, Mushroom Head
Heavy molded grade for structural and load-carrying panel joints.
Molded Hook Tape — 20 mm, Assorted Colours Palm-Tree Hook
Palm-tree profile: softer hand, easier to align on curved surfaces.
Molded Hook Tape — 25 mm, Black & White Palm-Tree Hook
Molded hook that stays flat when wrapped around a tube.
Molded Hook Tape — 16 mm Assorted Colours, Mushroom Head
Molded hook for appliance and medical equipment housings.
Molded Hook Tape — 25 mm Black, Mushroom Head
Grade for closures that stay visible on the finished product.
Molded Hook Tape — 20 mm, Blue & Red Unnapped, Plain Back
Unnapped hook with a flat back for printing and adhesive lamination.
Molded Hook Tape — 25 mm, Black & White Adhesive Backed
Molded hook pre-coated with adhesive for fixture and trim fixing.
Molded Hook Tape — 50 mm, Red & Pink Heavy Duty
Dense molded hook for repeated opening under load.
Molded Hook Tape — 16 mm Black, Mushroom Head
Molded mushroom hook for thin-wall panels and low-profile closures.
Molded Hook Tape — 20 mm Black, Mushroom Head
Standard molded hook, high cycle life with a matching loop.
Molded Hook Tape — 25 mm Orange, Mushroom Head
Everyday width for automotive trim, seating and access panels.
The models we quote most often
| Model / specification | What it is used for |
|---|---|
| MH-01 16 mm Red & Black, Mushroom Head | Molded mushroom hook for thin-wall panels and low-profile closures. |
| MH-02 20 mm Assorted Colours, Mushroom Head | Standard molded hook, high cycle life with a matching loop. |
| MH-03 25 mm Black & Grey, Mushroom Head | Everyday width for automotive trim, seating and access panels. |
| MH-04 30 mm Black & White, Mushroom Head | Wider head pattern for higher shear load on rigid panels. |
| MH-05 50 mm Clear, Mushroom Head | Heavy molded grade for structural and load-carrying panel joints. |
| MH-06 20 mm, Assorted Colours Palm-Tree Hook | Palm-tree profile: softer hand, easier to align on curved surfaces. |
| MH-07 25 mm, Black & White Palm-Tree Hook | Molded hook that stays flat when wrapped around a tube. |
| MH-08 16 mm Assorted Colours, Mushroom Head | Molded hook for appliance and medical equipment housings. |
| MH-09 25 mm Black, Mushroom Head | Grade for closures that stay visible on the finished product. |
| MH-10 20 mm, Blue & Red Unnapped, Plain Back | Unnapped hook with a flat back for printing and adhesive lamination. |
| MH-11 25 mm, Black & White Adhesive Backed | Molded hook pre-coated with adhesive for fixture and trim fixing. |
| MH-12 50 mm, Red & Pink Heavy Duty | Dense molded hook for repeated opening under load. |
| MH-13 16 mm Black, Mushroom Head | Molded mushroom hook for thin-wall panels and low-profile closures. |
| MH-14 20 mm Black, Mushroom Head | Standard molded hook, high cycle life with a matching loop. |
| MH-15 25 mm Orange, Mushroom Head | Everyday width for automotive trim, seating and access panels. |
What this family is
Molded hooks are injection-molded from PP or PE rather than woven. The result is a flat, low-profile hook field with identical geometry on every hook, no fraying and no loose fibre — which matters in cleanrooms, medical devices and thin-wall packaging.
Because the hook is a solid part, it can be ultrasonically welded, heat-sealed or adhesive-laminated, and it engages loop or non-woven surfaces with high peel strength in the peel direction while releasing cleanly in shear.
Related constructions: Back-to-Back Strap and Hook & Loop Cable Ties.
Available options
- PP or PE resin
- Black, white, transparent
- Weldable, sewable or adhesive
- Narrow slit widths
Specification
| Material | Molded PP / PE hook + loop or non-woven |
|---|---|
| Profile | Flat, low-profile hook field |
| Width | 10–100 mm |
| Colour | Black, white, transparent |
| Backing | Weldable, sew-on, adhesive |
| Format | Rolls, die-cut parts |
| MOQ | Confirmed with your quotation |
| Lead time | Confirmed with your quotation |
Typical applications
- Diapers and hygiene products
- Medical fixation and wearables
- Automotive trim and seating
- Thin-wall packaging
Adjacent constructions
Specifying Molded Hook Tape
What widths can you supply in Molded Hook Tape?
Standard supply runs 10–100 mm. Custom slitting and edge tolerance are confirmed on the quotation.
Which backing or format should I choose?
Available options are Weldable, sew-on, adhesive. The choice depends on the substrate and how the part is assembled; we test on your material before production.
Can you make Molded Hook Tape to my drawing or sample?
Yes. We produce to an approved drawing or your own sample, including slit rolls, tabs and die-cut parts. Tooling, MOQ and lead time are confirmed with the quotation.
Send the drawing. We will tell you what will fail.
Width, colour, backing, quantity and the surface it has to stick to — that is enough to start.