Die-Cut Hook & Loop
Your drawing, converted: rotary and flatbed die-cutting with agreed tolerances.
Die-Cut Hook & Loop — 25 mm, Black Round Dot
Kiss-cut dots on a sheet for high-volume manual assembly.
Die-Cut Hook & Loop — 30 mm, Black & White Round Dot
Larger coin for wall fixing and small signage.
Die-Cut Hook & Loop — 20 × 80 mm, Camo Tab
Narrow tab for cable labels and garment hanging loops.
Die-Cut Hook & Loop — 25 × 100 mm, Red & Black Tab
Standard tab for bundling and pull-release closures.
Die-Cut Hook & Loop — 30 × 150 mm, Grey & Black Strap End
Strap end shaped to pass through a buckle and fold back.
Die-Cut Hook & Loop — 40 × 60 mm, Black Rectangle
Rectangle pad for panel alignment and removable fixing.
Die-Cut Hook & Loop — 50 mm, Green Square Pad
Square pad for picture hanging and display mounting.
Die-Cut Hook & Loop — 60 mm, Camo Round Pad
Large round pad for furniture and floor protection.
Die-Cut Hook & Loop — Assorted Colours, Custom Outline per Drawing
Any outline you can draw, cut on a rotary die from 500 pcs.
Die-Cut Hook & Loop — Black, T-Shape Slot
T-slot part that locks a strap without a buckle.
Die-Cut Hook & Loop — Black, Ring / Washer Shape
Ring part for screw fixing and eyelet reinforcement.
Die-Cut Hook & Loop — Camo, Kiss-Cut Sheet, Multiple Parts
Several parts nested on one sheet to cut handling time.
Die-Cut Hook & Loop — 25 mm, Blue & Purple Round Dot
Kiss-cut dots on a sheet for high-volume manual assembly.
Die-Cut Hook & Loop — 30 mm, Black Round Dot
Larger coin for wall fixing and small signage.
Die-Cut Hook & Loop — 20 × 80 mm, Assorted Colours Tab
Narrow tab for cable labels and garment hanging loops.
The models we quote most often
| Model / specification | What it is used for |
|---|---|
| DC-01 25 mm, Black Round Dot | Kiss-cut dots on a sheet for high-volume manual assembly. |
| DC-02 30 mm, Black & White Round Dot | Larger coin for wall fixing and small signage. |
| DC-03 20 × 80 mm, Camo Tab | Narrow tab for cable labels and garment hanging loops. |
| DC-04 25 × 100 mm, Red & Black Tab | Standard tab for bundling and pull-release closures. |
| DC-05 30 × 150 mm, Grey & Black Strap End | Strap end shaped to pass through a buckle and fold back. |
| DC-06 40 × 60 mm, Black Rectangle | Rectangle pad for panel alignment and removable fixing. |
| DC-07 50 mm, Green Square Pad | Square pad for picture hanging and display mounting. |
| DC-08 60 mm, Camo Round Pad | Large round pad for furniture and floor protection. |
| DC-09 Assorted Colours, Custom Outline per Drawing | Any outline you can draw, cut on a rotary die from 500 pcs. |
| DC-10 Black, T-Shape Slot | T-slot part that locks a strap without a buckle. |
| DC-11 Black, Ring / Washer Shape | Ring part for screw fixing and eyelet reinforcement. |
| DC-12 Camo, Kiss-Cut Sheet, Multiple Parts | Several parts nested on one sheet to cut handling time. |
| DC-13 25 mm, Blue & Purple Round Dot | Kiss-cut dots on a sheet for high-volume manual assembly. |
| DC-14 30 mm, Black Round Dot | Larger coin for wall fixing and small signage. |
| DC-15 20 × 80 mm, Assorted Colours Tab | Narrow tab for cable labels and garment hanging loops. |
What this family is
Die-cutting turns hook and loop into a component: a disc, a tab, a ring, a strap end, a kiss-cut label on a roll. The difference between a good and a bad part is usually the edge — a crushed hook field or a lifted liner will jam an assembly line.
We agree the tolerance, the liner and the edge quality from your drawing, then produce a first-article sample for approval before the run.
Related constructions: Adhesive-Backed Hook & Loop and Molded Hook Tape.
Available options
- Rotary or flatbed die-cutting
- Kiss-cut on roll or loose parts
- Any base hook and loop
- First-article sample
Specification
| Material | Any hook & loop base |
|---|---|
| Process | Rotary / flatbed die-cutting |
| Tolerance | Agreed from drawing |
| Format | Loose parts, kiss-cut rolls |
| Shapes | Discs, squares, tabs, rings, custom |
| MOQ | Confirmed with your quotation |
| Lead time | Confirmed with your quotation |
Typical applications
- Furniture glides and pads
- Strap ends and tabs
- Assembly-line consumables
- Promotional giveaways
Specifying Die-Cut Hook & Loop
What widths can you supply in Die-Cut Hook & Loop?
Standard supply runs confirmed with your quotation. Custom slitting and edge tolerance are confirmed on the quotation.
Which backing or format should I choose?
Available options are Loose parts, kiss-cut rolls. The choice depends on the substrate and how the part is assembled; we test on your material before production.
Can you make Die-Cut Hook & Loop to my drawing or sample?
Yes. We produce to an approved drawing or your own sample, including slit rolls, tabs and die-cut parts. Tooling, MOQ and lead time are confirmed with the quotation.
Send the drawing. We will tell you what will fail.
Width, colour, backing, quantity and the surface it has to stick to — that is enough to start.